PSW10 Subwoofer Hookup - Polk Audio Forum
Here's what I decided on: Stick with the PSW10 at $105 on Amazon Not put any new wiring through the ceiling Instead connect directly to the AVR's subwoofer output Use a 35' subwoofer cable with a Y connector ($26 on Amazon) Set the variable low pass filter to its highest setting, making use of the AVR's filter.
Cables needed for PSW10 - Polk Audio Forum
I was wondering what cables I need to hook up my PSW10 sub to the receiver. Here is my setup: Panasonic 55ST50 Denon A/V 1613 Take 5 pure energy 5.1 Pack. PS3 POLK PSW10 sub What I have so far is: 100ft of 14g speaker wire w/ banana plugs Coaxial Audio/Video RCA CL2 Rated Cable (Don't know if I need this, someone gave me one they didn't use) Do ...
PSW10 settings - Polk Audio Forum
I have the PSW10 on order and should get it by mid-week, and I have an Onkyo TX-SR601 receiver. Complete newbie with a sub, but somewhat experienced with the surround system. My other speakers are RT55 fronts, RT25 rears and the CS245i center.
Making connections to PSW10 - Polk Audio Forum
I just installed a PSW10 using the single subwoofer output jack (80Hz crossover at the receiver, subwoofer filter all the way clockwise, and adjusted to about 3/4 volume level) and feel I need more base, without having to adjust this individual speaker at the receiver all the way up, or cranking the speaker volume control to max.
Conecting 4 (8 ohm) speakers to PSW10 Powered Subwoofer
The PSW10 just passes the audio signal from your receiver on to the speakers that are connected to it. In other words, think of the sub as a conduit for the audio produced by the amplifier. As long as the amplifier is comfortable with the speaker load the sub woofer is only a connection point.
Replacement Amp Board on PSW110? — Polk Audio Forum
HT SYSTEM-Sony 850c 4k Pioneer elite vhx 21 Sony 4k BRP SVS SB-2000 Polk Sig. 20's Polk FX500 surrounds Cables-Acoustic zen Satori speaker cables Acoustic zen Matrix 2 IC's Wireworld eclipse 7 ic's Audio metallurgy ga-o digital cable Kitchen Sonos zp90 Grant Fidelity tube dac B&k 1420 lsi 9's
psw10 subwoofer opinion.... - Polk Audio Forum
I used to have PSW10 and bookshelf monitor speakers powered by 702 and I personally do not like PSW10. It doesn't have enough bass for me and doesn't have quality bass. It was a big difference with that system when I upgraded the sub to PSW505.
Subwoofer/ Speakers setup - Polk Audio Forum
Hello. I recently purchased the Polk PSW10 powered sub-woofer. My concern is in regards to how can I setup my system if I want my main speakers to handle just the mid/hi frequencies and the bass to be handled (only) by the polk sub? Stereo Receiver: Sherwood RX-4503 Main Speakers: Sony SS-B1000 Sub: Polk PSW10 Any help would be greatly ...
PSW10 wiring help - Polk Audio Forum
This would mean, if used with a subwoofer, that the sub's playing volume will remain at a constant volume no matter where the receiver's main volume is set. It would be better to simply run another right and left speaker wire from the receiver's speaker level outputs to the corresponding right and left speaker level inputs on the sub.
Troubles With My PSW10 Subwoofer — Polk Audio Forum
Thanks for doing the test, it seems that something has happened to the sub. There's really two parts to the unit, the bass amplifier and the 10" woofer, but don't worry both parts are covered by Polk's warranty. At this point give Polk CS a call at 1-800-377-7655 or send them an email to [email protected]. They'll help you troubleshoot to ...