Solved: Canon A-1 Auto Winder not working - Canon Community
2023年6月21日 · Does your A-1 wind properly by hand, reliably? I have had bad winders break cameras and vice versa. I'm lucky in having three good Winder A2s on my A-1, and AE-1 Programs.
Canon A-1 Auto Winder not working - Page 2 - Canon Community
2024年4月22日 · Inside the camera, there are pins above the winder that have contact with gold plates. One was bent, not allowing current to flow when the shutter is fired. Pics are attached. …
Canon A1: shutter won't open, film won't advance - Canon FD …
2004年3月2日 · Try to remove the winder coupling lid on the underside. Then turn the gear with a pair of pliers. If that recocks the shutter, and advance the film, something is probably wrong with the film advance lever. I have had trouble with this before, and it turned out to be the pin that the advance lever drags with it that was broken.
Canon A1: Film advance lever stuck, shutter won't press, LED info ...
2020年8月5日 · The camera has to be on. Top left lever should expose a white dot. The top right side lever should show the "A" inside the little window. The lens cap should be off and the meter active. Point the camera at a normally lit area. Wind and release the shutter. That is how mine works. Edited August 29, 2020 by danac
Canon A1 Shutter/Winder issue (60 F M) message - Photo.net
2024年7月25日 · I recently was given a Canon A1 by a friend whose Dad was looking to get rid of it. everything seems to be in great condition but the winder and shutter won't work. Additionally when holding down the button next to the On/Off switch to check for power, the LED doesn't flash like it is apparently supposed to to indicate power, even inspite of me ...
SOLVED: The manual winder will not advance the film. - Canon AE-1
2013年4月29日 · The best way to fix this is to get the wind assembly and replace it Vs trying to fix the clutch or gears. You'll need to take the lens mount bezel cover off (four screws) then take the top cover off (six screws). spin off the lever cap screw and the lever parts and the rewind crank (left hand screw).
Re: Canon A-1 Auto Winder not working
Hi. New here. Sorry to dredge up an old thread. I recently bought another A-1 after foolishly selling another I had for years. I purchased the MA motor drive for it from
Canon A1 winding lever stuck : r/CanonCamera - Reddit
2023年2月5日 · So i bought an old A1 camera cheap from a cousin and it seems to be near pristine condition if it wasnt for the fact that the winding lever doesn't move past the halfway point. I have new batteries, new film, tried the double exposure and it doesn't move either.
Canon AE1 Program winder won’t advance : r/AnalogRepair - Reddit
2023年5月4日 · You can manually trigger the shutter even with a faulty magnet by taking the bottom cover off and detaching the shutter trigger lever with a screwdriver. Cleaning up that top plate is going to be fun 🙌. Try this: https://www.youtube.com/watch?v=Vonx87C1zvU&t=44s.
Canon AE-1 Will Not Fire Nor Wind - Canon Forums
2019年1月20日 · To elaborate on my problem, the camera does get power. If I press the battery check button, the needle will point at 5.6, which indicates that the battery is working properly. Also, if I point it at a light source, such as a lamp, the needle will begin moving, which is …