How Far Can a 2X8 Span Without Support? - Weekend Builds
Depending on various factors, the maximum span for a 2×8 floor joist is 16’ 6”. The maximum span for roof rafters is 23’ 9”. For headers, the maximum span is 11’ 2”. Finally, a single deck beam has a maximum span of 5’ 11” and double maxes out at 8’ 9”.
Joist Span Table for Floor Joists - myCarpentry
Joist span table - use these span tables to determine maximum spans based on the species and grade of lumber, the size of the floor joists, the spacing of the floor joists, and either of these two common design scenarios: Live load of 30 PSF / a dead load of 20 PSF / …
How Far Can a 2X8 Span Without Support? - Plasticine House
In general, a 2×8 will span 1.5 x 8, so 12-feet. Based on all factors though, a 2×8 joist span is 7’-1” to 16’-6”, and a rafter 6’-7” and 23’-9”. In this guide, we’ll explain what span means in terms of construction, factors that impact the span, and how much weight a 2×8 can support.
Span Tables - Calculate Joist, Rafter and Wood Beam Spans
Use the span tables in the links below to determine the maximum allowable lengths of joists and rafters. These tables provide maximum spans for the #2 grades of four common species of lumber (Southern Pine, Douglas Fir, Hem-fir, and Spruce-pine-fir (SPF).
Span Options Calculator for Wood Joists and Rafters
Performs calculations for ALL species and grades of commercially available softwood and hardwood lumber as found in the NDS 2018 Supplement. Joists and rafter spans for common loading conditions can be determined. A “span options” calculator allows selection of multiple species and grades for comparison purposes.
further information on span measurements including a chart which converts horizontal distances to sloping distances, or vice versa. 6.OOF LOADS R Rafter spans are tabulated for the most common roof loads. The loads are based on adjusted roof snow loads from the governing building code. For roof live loads less than 20 pounds per square foot ...
Tables 1 through 3 are abbreviated span tables for pressure-treated Southern Pine visual grades No.1 and No.2, intended for use under wet-service conditions (floor/deck joists) where moisture content (MC) exceeds 19%.
Lumber Span Tables for Spruce-Pine-Fir South (SPFs)** Ceiling Joists - 20 psf Live Load, 10 psf Dead Load, L/240 Deflection ( Limited Attic Storage ) Note: Deflection is limited to the span in inches divided by 360 for live load only.
Selected lumber design values and span tables for these species groups are provided in this publication. Comprehensive information for Western species lum-ber products (Douglas Fir-Larch, Douglas Fir South, Hem-Fir, Spruce-Pine-Fir South, Western Cedars and Western Woods) can be found at www.wwpa.org.
Joist Span Tables - Ceiling Joists - myCarpentry
Joist span tables - use these tables to determine maximum spans based on the species and grade of lumber, the size of the ceiling joists (2x4, 2x6, etc.), and the spacing of the ceiling joists. The ceiling joist tables below cover the following two design scenarios:
- Some results have been removed