How to Install Flareless Tube Fittings | HoseandFittings.com
Step 1: Lubricate thread and cone of the fitting body. Step 3: Lubricate ferrule with system fluid or a compatible lubricant. Step 5: Manually screw nut onto fitting body until finger tight. Step 7: Hold tube steady against internal shoulder of fitting body and tighten nut an additional 1¾ turns. Step 2: Slip nut and ferrule over deburred tube ...
The general assembly procedure for all adjustable parallel thread port ends is the same. Likewise, the assembly procedure is the same for all non-adjustable parallel thread port ends. Adjustable Port End Assembly 1. Inspect components to ensure that male and female port threads and sealing surfaces are free of burrs, nicks and
Bulkhead fitting installation. - tpub.com
These fittings are used for connecting tubing to components of the system, and for connecting sections of tubing where the line passes through a bulkhead and the fitting is secured to the bulkhead, as shown in figure 4-24.
To properly install a fitting the ferrule must be preset on the tube in one of two ways: manually with the use of an SSP manual preset tool (described below), or hydraulically with an SSP hydraulic preset tool, the manual method involves threading together the tube nut and preset body. The hydraulic method
MS33566B FITTINGS INSTALLATION FLARELESS TUBE …
ms33566b, military specification: fittings, installation of flareless tube, straight-threaded connectors (20 mar 1975) [s/s by sae-as33566].
installation procedures below with care to ensure proper installation of Ermeto® fittings. Installation: 1. After sleeve and nut have been preset on the tubing and checked as described, the assembly is ready for installation into the Ermeto® fitting seat. 2. Lubricate threads, seat of fitting and shoulder of sleeve with a good grade of ...
How To Install Hydraulic Flareless Tube Fittings | Omega One
2021年10月29日 · Here’s how to properly install a flareless fitting. 1.Cut the tube square and lightly burr the inside and outside corners. 2.Assemble the fitting by sliding the nut over the tubing, with the open end out. Slide the ferrule onto the tubing with the cutting edge out—the large head end should be inside of the nut.
Brennan Industries, Inc.’s steel and stainless steel bite type fittings meet all design and performance requirements for hydraulic flareless tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE).
• Installation Templates • Instruction Manual “H” Fitting Installation Procedure and Specifications Options for Kit Packaging Dimensions: inches (mm) Eaton’s “H” Fittings are the quick, repair fittings that get military and commercial aircraft off the ground fast! • Immediate in-field repair template dot.capabilities
Installation Instructions Flareless Bite Type Fittings 3727 Westgate Rd. • Grand Island, NE 68803 • Phone: 800-323-5749 • Fax: 308-382-0253 Cutting, Deburring & Cleaning 1. Square-cut the seamless or welded-and-drawn tubing using a hacksaw with a fine-tooth blade, or a circular-toothed cut-off saw.