What size hole do I drill/ how much hilti 500 epoxy do I use.
Here is the link to the Hilti Anchor Fastening Technical Guide. The nominal bit diameter for threaded rod with HIT-RE 500 V3 can be found in Table 24 on page 128. Additionally, here is the link for information on the adhesive anchor volume calculator in order to determine the amount of adhesive required for your application. That was a great help.
HIT-RE 500 V3 Epoxy anchor - Chemical anchors - Hilti USA
HIT-RE 500 V3 Epoxy anchor New product. Item # r4929903. Ultimate-performance injectable epoxy mortar with approvals for rebar connections and heavy-duty anchoring
Selector Charts - Hilti USA
Selector charts to help you find the right Hilti product for your application.
what size hole do i use with 3/4" anchors - epoxy anchor train... - Hilti
The size of hole can be found in the ESR document and Hilti’s Anchor Fastening Technical Guide for the respective anchor that you will be installing.
the Hilti TE-CD or TE-YD hollow carbide drill bits used in conjunction of a Hilti vacuum cleaner that will remove drilling dust, automatically cleaning the hole. Elements that are suitable for use with this system are as follows: threaded steel rods, Hilti HIS-(R)N steel internally threaded inserts, and steel reinforcing bars.
drill bit size for anchoring - Hilti USA
Please refer to Table 38 on page 63 for the nominal bit diameter, as well as the fixture hole diameter, for threaded rod with HIT-HY 200. what size drill bit do i use for 3/4" hit z with hy200 epoxy. how many tubes of hy200 to 48 pcs. 3/4 x 7 1/2 embed hit z rod.
hollow drill bits and Hilti vacuum cleaner HIS-RN Stainless steel 316 HIT-IC with Carbon steel, zinc plated HIT-HY 270 ANCHOR SELECTOR Chemical — Rods & Elements DBS • 05/19 Hilti, Inc. (U.S.) 1-800-879-8000 | en español 1-800-879-5000 www.hilti.com Hilti (Canada) Corporation 1-800-363-4458 www.hilti.ca
suitable for dry and water saturated concrete. under water application. large diameter applications. high corrosion resistant. long working time at elevated temperatures. odourless epoxy. varied embedment depths. small edge distance and anchor spacing possible. Correct setting (See setting instruction) No edge distance and spacing influence.
Selector Charts - Hilti Canada
Selector charts to help you find the right product for your application.
Holes for 1" anchors - ANCHORS, Drilling - Hilti USA
How large should the holes be drilled for 1" threaded anchors (1 in. x 12 in. HAS-E Threaded Steel Rods - Hilti Model 2198009). Typically, for adhesive anchors with threaded rod, the nominal drill bit diameter is 1/8” larger than the threaded rod diameter, i.e. for 1 inch HAS rod, the nominal drill bit diameter is 1-1/8 inch.
- 某些结果已被删除