HO Turn Table from Scratch | ModelRailroadForums.com
2016年1月1日 · Made a wonderfull rigid turntable bridge with wooden walks and handrails on the either side. I glued a spindle from an old 78rpm record player audio turntable onto the underside of this turntable bridge, and this spindle could be pluged into the original record player turntable located under the base pit, and the drive was accomplished with a ...
Scratchbuilding a turntable - HO Scale - the MRH Forum
I just looked at Jim Marksberry's turntable tutorial. Great idea for using an inexpensive Atlas as the basis for a kit bash with a pit. I would add one more idea to his plan. If you check out a craft or sewing store, you can find perfectly round wooden embroidery hoops that will make nice round pit walls if you get one of the correct size.
Make your own HO Turntable - Part 1 - YouTube
2018年7月5日 · I'll show you how I built a homemade HO railroad turntable for my small switching layout. Link to Part 2: https://www.youtube.com/watch?v=zRpiwFAurUAPart 3...
Turntable Scratch Build - the MRH Forum - Model Railroad …
2021年7月8日 · The trick is to create a rectilinear hollow in the underside of the turntable. The plug gets attached to a block that fits the hollow (across the turntable) but is shorter than the hollow lengthwise. When the turntable rotates, the block can "wiggle" and compensate for a little bit of misalignment but will rotate with the turntable.
HO turntable conversion - Model railroad layouts plans
I have now completed the HO/HOn3 turntable conversion and now awaits the ground cover and the track leading up to it.
HO Turntable Construction Part 1 - YouTube
2011年8月9日 · In Part II Bob will show you how to install it onto the train layout and the wiring to a switch. ...more. This is Part 1 of how to construct a HO Model Railroad Turntable. For those that what...
HO scale roundhouse and turntable - Model railroad layouts plans
ho scale roundhouse and turntable - A few photos of my 99% completed HOn3 Roundhouse with all the lights fitted both inside and outside
Model train turntable - Model railroad layouts plans
Model train turntable - scratch build a turntable, using an old style large dual contact audio plug and jack as the spindle and pivot hole.
My Model Railroad: 135 foot Turntable Project - Blogger
This is my scratch built 120' Turntable. The bridge frame is made from K&S .25" x .032" brass channel. I made the rotating shaft from multiple sizes of K&S brass tubing ending up with a 5/16" shaft.
HO Turntables - Experience - Model Railroader Magazine
These are small deck turntables, only 9 inches across in HO, fine for my smaller steam engines and early diesels, but not for larger locomotives. I converted mine to a pit turntable. It was fun and ended up working very well, but it took quite a while and required every bit of my modeling skill.