Motorola xtl 5000 programming cable - RadioReference.com Forums
2023年2月25日 · You can fabricate your own USB or RS-232 Programming Cable but would need the connector, pins, and tool to crimp the pins. The RS-232 Data Cable is a very cost-effective option but you'd still need to place a jumper between Pins 14 & 15 before the radio will power up, even if Ignition sense is disabled.
How to build a TP9100 programming cable - RadioReference.com …
2024年2月1日 · Thanks to some advice, research, and at least 1 glass of Blanton's bourbon (plus a healthy amount of ****ing around and finding out), I have a modestly easy to build recipe for a programming cable for the above noted radio: Supplies needed:-Your favorite USB 2.0 to RS232 adaptor-A Startech strait through rs232 cable (part #MXt1002MBK)
AR8600-MK2 Advice wanted with Programming Cable for AOR …
2019年7月6日 · On the cable made for the 8200 between the 8200 connector and the DB9 there is a level converter that goes from TTL+5 to RS232 with +- voltages. You either need a MAX232 chip or a transistor circuit for that in a DB9 to FFC AR8000 cable.
Programming Cable Pinout? | RadioReference.com Forums
2009年9月24日 · PRO-97 cable vs PRO-164 cable The cable for which I posted the schematic above just uses a couple of transistors to change the voltage levels. It should be noted that RS-232 is a +/- 12 volt signal (24 volt change). The PRO-92 (which the above cable works with as well) uses 5 volt technology and the later scanners use 3.3 volt technology.
Motorola CPS PLUS programming using RS232
2018年1月5日 · Go to Tools > Options and make sure the communications settings are correct. Once you do that, go to File > Read Phone. You will not be able to automatically detect the unit with the RS232 cable.[/QUOTE Do you have and idea about communication setting how it should be configured ?
Which cable for bct15x connection to PC - RadioReference.com …
2014年8月18日 · There is a serial port cable (typically comes with new scanners), that is the 9 pin cable. You will typically only see serial ports on older model computers, and typically they are on the motherboard (back of the computer). Most laptops have this plug. The second cable (most of the time sold separately) is the USB cable.
ICOM FR4000 Programing Question - RadioReference.com Forums
2020年11月12日 · I ordered a programming cable on eBay (USB) and installed to prolific drivers. When trying to read the repeater, I get (after a slight delay) 4 short beeps and then a message to check the RS232 cable. The cable I purchased appears to be a generic cable for ICOM (USB to 8 pin modular cable).
OPC-478 cloning cable | RadioReference.com Forums
2016年1月24日 · I am trying to complete my cloning cable (RS232 edition) for an ICOM F22SR. While I was searching on the internet I found some schematics Icom ID-E880 - OPC-478 interface cable and schematic | Radioaficion Ham Radio However, I am a little bit confused...
Computer control the Radio - RadioReference.com Forums
2015年10月2日 · Not really trying to resurrect this thread. Just want to pass this information along. There is a difference in a 232 null modem cable and a 232-c. That's where I originally went wrong. Bought a 232-c or straight cable and wamo I now have the computer control thr gig. So if anybody is struggling with this like I did the 9 pin 232-c cable will work.
can't get into programming mode manually - RadioReference.com …
2023年5月20日 · I've just bought the Motorola PMKN4025A RS232 Serial cable, and connected to my Windows 7 machine, which I especially installed yesterday, for the Motorola CPS Plus 7.3 (R 07.30.09.30). My MTH800 it's running under R07.000.8661 firmware meanwhile the MTP850 is running under R13.000.8462 firmware.